How to change an air filter on a Husqvarna or Stihl chainsaw

If you own a gas chainsaw, it's important to keep it in top condition to ensure that it runs smoothly and efficiently. One of the most important maintenance tasks is changing the air filter, which helps to keep dust and other debris from entering the engine and causing damage. Here's how to change an air filter on the most  chainsaw:

Step 1: Turn off the chainsaw and allow it to cool down completely. This will ensure that you don't accidentally burn yourself while working on the chainsaw.

Step 2: Locate the air filter cover, which is typically located on the side of the chainsaw. It may be held in place with screws or clips.

Step 3: Remove the air filter cover and take out the old air filter. If the filter is dirty or damaged, it should be replaced with a new one. You can purchase replacement filters from most hardware stores or online store (like hipastore.com).

Step 4: Clean the air filter housing and any debris that may have accumulated inside. Use a soft-bristled brush or compressed air to remove any dirt or debris.

Step 5: Install the new air filter in the housing, making sure that it fits snugly and securely.

Step 6: Replace the air filter cover and secure it with the screws or clips.

Step 7: Start the chainsaw and make sure that it runs smoothly. If there are any issues, double-check that the air filter is installed correctly and securely.

Changing the air filter on your Husqvarna chainsaw is a simple task that can help to keep your saw running smoothly and efficiently. By performing regular maintenance tasks like this, you can extend the lifespan of your chainsaw and avoid costly repairs down the road.

The blewing videos may you help you learn the steps more clearly.

Video 1: How to chang an air filter on a Stihl MS170 or MS180 chainsaw?

In this video, we will show how to install an air filter on a Stihl MS 170 or MS 180 chainsaw. No tools are necessary for this simple job. Begin by removing the top cover by turning the latch counterclockwise lowering the choker lever and lifting the rear of the cover, remove the old air filter and replace with a quality repalcement air filter. Lastly, replace the top cover.


Video 2: how to change the air filter on a Husqvarna 440 chainsaw?

In this video, we will show how to change the air filter on a Husqvarna 440 chainsaw, though many models are the same or similar, no tools are strictly necessary for this common job though a flat screwdriver will help. Begin by removing the three Clips which hold the top cover unlatch, the metal bale clip that holds the filter and remove it by pulling straight up. It may come out as a single piece or the top cover may come off. In the end, replace by simply pressing in the new filter cap and reattaching metal clip.