MTD Parts

● Parts Compatible with Troy-Bilt TB2040XP TB21EC TB22 TB22EC TB32EC TB42BC TB80EC 25cc 27cc curved shaft weed eater/trimmer.
● Compatible with Bolens BL110 BL160 trimmer, BL425 tiller, BL125 Blower.
● Compatible with Remington RM2510 RM2520 RM2560 RM2570 RM2599 RM2750 trimmer, RM4625 tiller.
● Carb Replace # MTD 753-06190 Walbro WT-973.
● Each Hipa carburetor comes fine-tuned from the factory.
● Package: carburetor*1, air filter*1, (3/16" OD X 3/32" ID) 2ft fuel line*1, fuel filter*1, gasket*2.

● Carburetor fits for MTD engine 170-SU, 270-SU, 270-SU-11, 270-SUA, 370-SUB 2010 & After, 370-SUB-11, 370-SUC.
● Carburetor fits for Troy-Bilt snow blower Storm 2410 31AS63N2711 2410 31AS63N2766 2420 31AM63P2766, and more.
● Replacement 951-14026A 951-14027A 951-10638A 951-14023A carburetor.
● Each Hipa carburetor comes fine-tuned from the factory.
● You will get: 1 carburetor, 3 gasket, 1 primer pump bulb, 1 fuel filter, 1 spark plug for you Troy Bilt Storm 2410 2620 snow blower. Note:The Size is Manual Measurement, Please Compare Before Purchasing.

● Note: This carburetor does not have a choke valve. Please ensure it meets your needs before making a purchase.
● Carburetor Replacement # C1U-P27, MTD 753-06288, 753-08984, 751-15112A, 751-15112.
● Parts fits Troy-Bilt TB35 EC 25CC 27CC 2 cycle straight shaft gas weed eater, TB2044XP TB25SEC TB25CE TB25CH TB25SH TB25HT TB25PS TB27BC TB27PHEC TB35EC, and more;
● Every Carburetor Tested, Quality Assured: Wet Flow Test, Pressure Test, Corrosion Test, Precision Test.
● Pre-adjusted by manufacturer, bolt on and go! Carb all-in-one kit to solve your trimmer won't start, hard to start, leaking engine's problems & more.
● Package Includes: 1x Carburetor, 1x Pac Man Adjusting tool, 1x Fuel Filter, 2x Gasket, 1x Primer Bulb, 2x 2Feet Fuel line.

● Fuel Pump Replaces Kohler 24-393-16, 24-393-16-S, 24-393-16-04.
● Fits CH13T, CH18, CH18S, CH20, CH20S, CH20QS, Command ch 18 18s 20 20s engine fuel bump;
● Briggs and Stratton 808656 491922 808492 692313 fuel bump;
● Honda 16700-Z0J-003 gc160 5.0hp gc190 6hp gx620 20hp fuel bump;
● John Deere LG808656 / M138498 / M145667 L105 L107 L108 L111 L118 L120 L130 LT166 LT180 LT190 LTR166 LTR180 LX277 LX280 LX288 lawn mower.
● Hipa fuel pump ensures consistent and reliable fuel supply to solve your engine's starting issues, fuel tank noise and engine sputtering problems, and more.
● Package: fuel pump*1.

● Fuel Pump Replaces JD LG808656 M138498 M145667
● Vacuum style fuel pump, fits 1/4-inch fuel line. Typical application: up to 25 horsepower.
● Used on John Deere L105 L107 L108 L118 L120 L130 LT166 LT180 LT190 LTR166 LTR180 LX277 LX280 LX288 Riding Lawn Mower.
● Used on John Deere L105 L107 L108 L118 L120 L130 LT166 LT180 LT190 LTR166 LTR180 LX277 LX280 LX288 Riding Lawn Mower;
● Package include: 1 fuel pump, 1 fuel filter.

● FITS ON TECUMSEH 13.5 HP CARBURETOR, replace # tecumseh 640065A 640065 TEC-640065A.
● Fit for tecumseh 4-cycle vertical shaft engine: OHV130 OHV125 OV358EA OHV110 OHV120 OHV135.
● FITS ON OHV130 CARBURETOR, Fit for Tecumseh 11HP 11.5HP 12HP 12.5HP 13HP 13.5HP 14HP 15HP Engine Parts.
● [DIMENSIONS FITS ON TECUMSEH OHV130 CARBURETOR] Mounting Hole Distance(Center to Center): 52mm, Throttle Diameter: 27.5mm, Choke Diameter: 31.6mm, Venturi size: 22mm, Fuel Inlet Line Size: 7mm.
● Package include: 1 x carburetor with gasket.

● 16 Inch chain for 16" (41cm) guide bar. Drive Links: 57, Pitch: 3/8" Low Profile, Gauge: .050".
● Replacement for OEM Part Numbers: Carlton 50R57, N1C-057G, N1C-57E, N1C-57G, GB R50S-1PL57, Oregon 91VS057G, 91VXL057G, 91PXL057G, Echo 91PX57CQ
● Compatible with ECHO CS-310 CS-370 CS-400 CS-352, Worx WG300, WG303, WG304, Craftsman 38070 CMXGSAMY426S, Black & Decker CS1216, Homelite UT10532, Earthwise CS30116 & CS33016 corded, Remington RM4216 Rebel 42cc 16" Chainsaw, .
● Blued cutters deliver better corrosion resistance and surface hardness.
● Multipurpose use, especially for clean or dirty wood, frozen or green wood.
● Work out of the box, easy to sharpen.
● For saw sizes up to 42 cc.

● Compatible with Honda GX31, FG100, HHE31C Edger, HHT31S, WX10 water pump and more.
● Replace Walbro parts WYL-68A,WYL-127,WYL-97 Carburetor.
● Replace Honda 16100-ZM5-809, 16100-ZM5-822, 16100-ZM5-802, 16100-ZM5-807 ,16100-ZM5-806 Carb.
● Precisely aligned mounting hole makes perfect fit for your equipment.
● Pre-adjusted from the factory, easy to install.
● Gives good power due to fuel efficiency.

Overall O.D.: 28.44mm
For approx 23mm (Approx. 7/8") tank hole, for 1/8" I.D. (approx 5mm O.D.) fuel lines
Replace OEM Part Number: HOMELITE 560878001,560878002, TORO 51954, KAWASAKI 92071-2073, MTD 971-181767, RYOBI 181767
Fitment: Homelite 51944 51945 51954 51955 51974 51975
Quantity: 5pcs 2-Hole Fuel Tank Grommet

● Compatible with Models: MTD 4P90HU,4P90JHA, 4P90JU, 4P90JUA,4P90JUB,4P90MU,4P90MUA,4P90MUB Engine.
● For sizes up to 10 hp, 14hp, 15hp, 16hp, 17hp, 18hp, 19hp, 20hp engines and more.
● From hard-starting, stalling, leaking to smoking, we've got your fuel and ignition issues covered.
● Package: 1x carburetor, 1x spark plug, 3x gasket , 2xfuel filter, 2x pipe.

Zone Control Cable Replace MTD 746-1130，946-1130. Replacement part for many brands including MTD, Yard Machines, Troy-Bilt, Cub Cad, Bolens ,Huskee, Craftman, To-ro and more.
746-1130 946-1130 Zone Control Cable length: 54 1/2". Conduit length: 40.9". You can make a proper adjustment in length to fit your mower if needed.
Package include: 1 Zone Control Cable.Look at you cable before you order so you receive the correct one.Easy to install with Z bend on each end and a plastic clip. Please note: NO extension spring or zip tie included.
The control cable connects to the control handle of the lawn mower.When the control handle is engaged the mower blade will begin to rotate, when the handle is released the blade will stop.

Zone Control Cable Replaces # Mtd 946-0957, 746-0957.
Control Cable for Troy Bilt TB110 TB130 Murray ME21550 ME21625
Fits for Cub Cadet CC109 CC469 Lawn Mower, Craftsman 21" Walk Behind Mower
Zone Control Cable Size (37-1/4-Inch): Length 50 inch 1/4", Conduit Length 37 inch 1/4".
Package Includes 1* control cable as pictured.

Replace manufacturer part number: 188-512, 188-512-1
CRAFTSMAN RYOBI UP04033 300780004 300780001 Fits Poulan 35879158 35879558 35879898 3587952 35879556 35879516 3587958 35879518
HOMELITE HLT28 ST145 ST155 CS50 CS4018 CS5020 D4150B D450B D4550BC CS40
Please compare the sizes with your old bulb carefully, make sure it fit
Package includes: 10 x primer bulbs.

Fuel Tank Grommet used on 13mm (33/64") tank hole. (Grommet Sizes: I.D. 3/8-inch, O.D. 1-1/16-inch, HT 5/8-inch)
Replaces MTD Troy Bilt parts # 735-0149 935-0149: TORO / Wheel Horse # 104047 46-6560; Kohler 25 313 01-S, 25 313 01; Snapper # 1654930 7012337; Tecumseh # 33679; Scag # 48309; Bolens # 173-8433
Compatible with Generac, Craftsman, Snapper, Troy-Bilt 3250 3500 3550 3750 5000 5250 5500 5600 6200 7500 8000 watt portable generator; 2500 2700 2900 PSI pressure washer
Package includes: 5 x gas fuel tank bushing

946-04173E Control Cable Replace MTD 746-04173A 746-04173B 746-04173 946-04173 946-04173.
946-04173E Control Cable Fits Craftsman 247288841 247288810 247288852 247203701 247288843, MTD 13A1762F065 13A1762F265 13A2775S000 13A2775S001 13AJ775S059 13AN772S058 13AO785S058 13AX795T004, Troy-Bilt 13BX78KS011 13AN77KS066 13WX78KS211 13WX79KT011 Lawn Tractor.
946-04173E Control Cable Dimensions: 55.0" Lg.
Package: 1 * control cable.

● 30 Inch Riding Mulching Mower Blade Replaces OEM Number: 742-04385 942-04385.
● 30 inch Mower Blades fits for Troy-Bilt TB30 TB30R; Craftsman R1000 RER1000 R1500 R140 R105 R110; Cub Cade CC30 and CC30 H.
● MOWER BLADE SPECIFICATION: Length: 29-15/16"(760mm), Width: 2-7/16"(62mm), Thickness: 5/32"(4mm), Center Hole Shape: 6 Point Star(5/8"), For Deck Size: 30", Lift: 11/16"(17mm).
● AVOID MISTAKES: This 942-04385 blade is ONLY compatible with a 6-Point Star(5/8") spindle. Please check that your center hole pattern matches before purchasing to avoid installation issues.
● Package inlcude: 1-Pack 6 Point Star High-Lift Blades

● Air Filter Replace Honda 17211-ZG9-M00, 17218-ZG9-800, 17231-2M0-000, 4327883, 4327391.
● For Honda GVX140 Engine Lawn Mower Air filter.
● Air filter Size: L x W x HT: 5-3/4" x 3-1/2" x 1", Pre filter L x W x HT: 5-5/8" x 3-3/8" x 1/4"
● Designed for increasing engine power and acceleration.
● Simple drop-in design, easy to install. The air filter keeps your engine safe against dirt.
● Package: 1x Air Filter, 1x Air Filter Foam, 1X Spark Plug.

● Air Filter SIZE: 5-1/8" L x 2-7/8" W x 1-1/4" H.
● Air Filter Fits 9B902, 98902, 98982, 10A902, 10B902 and 10A982, 10a900, 98900, 9b900, 9c900 series after code 02101000.
● Designed for increasing engine power and acceleration.
● Simple drop-in design, easy to install. The air filter keeps your engine safe against dirt.
● Package Include: 10x Air Filters.

Hipa 18-inch Chainsaw Chain 3/8" LP Pitch .050" Gauge 62 Drive Link.
FIts for Echo CS370 CS370F CS400 CS400F Poulan Pro 2050 2055 2075 2150 P3818 P3314 P3416 P3816 P4018 PP4018 PP4218A PPB4018 RM4214 RM4216 RM4218.

● MPN MF/DYNAMARK/NOMA: 53716, ARIENS: 03057700, 3057700, BAD BOY: 108-5349-00, BRIGGS & STRATTON: 5409H, 5409K, HUSTLER: 030817, MTD: 725-0530, 725-0771, 725-1426, 925-0771, 925-1426, 9251426A, MURRAY: BS5409D, 21261, 24285, 424285, 5409D, 5409H, 5409K, 745000MA, 924285, SNAPPER/KEES: 1-8817, 7075671, 7075671YP, 75671.
● Free shipping.

● Starter Solenoid Fits MTD front and rear engine rider models 1990-1994
● Replacement for MTD 725-1426, 925-1426, 925-1426AB, 1751569, 1740056, 925-01426A, 7251426, 925-1426, 725-1426A, 725-1426 and 725-1426P. Oregon 33-335.
● Replacement for Snapper 1-8817 90º mount, 3 post
● Slide connector terminal, 1/4" diameter bolt, 50% duty, 80 amp capacity

Air filter Compatible manufacturer part number: Honda # 17211-ZG9-M00 17218-ZG9-M00 08170-ZG9-M00 08170-ZG9-M01
Kohler # 14-083-01-S 14-083-01-S1 14-083-02-S 14-083-04-S 14-083-19-S
Cub Cad/MTD/Troy-Bilt # 751-10298 951-10298; Ariens # 21543500
Compatible with Honda GVX140 HR215K1 HRB215 HRB215K1 HRB215K2 HRB215K3 HRB215K4 HRC215 HRM195 HRM215 HRM215K1 HRM215K2 HRM215K3 and HRM215K4 Model Series Mowers
Compatible with Kohler 149cc XT6 XT7 XT149 XT173 XT800 XT-6 and XT-7 engine, walk behind lawn mower air cleaner Compatible with MTD 159cc 173cc, 4.5 - 6.5 HP OHV engine, 11A 12A series push lawn mower / tractor element
Air filter Size: L x W x HT: 5-3/4" x 3-1/2" x 1", Pre filter L x W x HT: 5-5/8" x 3-3/8" x 1/4"
Package include: 3 x air filter, 3 x pre filter

Great value at a fair price.
Aftermarket prices for OEM quality.
Free shipping.

● Quality materials offer durable, smooth, and efficient operation.
● Build for super smooth operation - durable for hot/cold environments.
● Each control cable must pass the pull test from the factory.

Hipa 51 inch Control cable (brake) replaces # 946-04661A 946-04661 746-04661A 746-04661, Please verify your engine model and part numbers before purchasing to ensure you receive the correct parts.
51-1/2" total length. (from Z-end to Z-end) 38-1/2" plastic conduit (end fitting to end fitting), Exposed Wire Length Wire travel distance (excluding Z parts)11-1/2"
Compatible with MTD Troy Bilt 21" lawn mower TB100 TB110 TB115 TB120 TB130 TB130XP TB140 TB160 TB160XP TB230 TB240 TB270XP TB280ES lawnmower parts
Compatible with MTD Troy Bilt 21" lawn mower TB320 TB330 TB330XP TB350XP TB360XP TB365XP TB370XP TB380XP TB410XP TB450XP TB490XP P21 P21HW P21XL P21XL-H lawnmower, Compatible with Cub Cadet SC100H SC700H lawn mower tractor parts
Package: 1 * Hipa control cable.