Cub Cadet Parts

● Parts Compatible with Troy-Bilt TB2040XP TB21EC TB22 TB22EC TB32EC TB42BC TB80EC 25cc 27cc curved shaft weed eater/trimmer.
● Compatible with Bolens BL110 BL160 trimmer, BL425 tiller, BL125 Blower.
● Compatible with Remington RM2510 RM2520 RM2560 RM2570 RM2599 RM2750 trimmer, RM4625 tiller.
● Carb Replace # MTD 753-06190 Walbro WT-973.
● Each Hipa carburetor comes fine-tuned from the factory.
● Package: carburetor*1, air filter*1, (3/16" OD X 3/32" ID) 2ft fuel line*1, fuel filter*1, gasket*2.

● 16 Inch chain for 16" (41cm) guide bar. Drive Links: 57, Pitch: 3/8" Low Profile, Gauge: .050".
● Replacement for OEM Part Numbers: Carlton 50R57, N1C-057G, N1C-57E, N1C-57G, GB R50S-1PL57, Oregon 91VS057G, 91VXL057G, 91PXL057G, Echo 91PX57CQ
● Compatible with ECHO CS-310 CS-370 CS-400 CS-352, Worx WG300, WG303, WG304, Craftsman 38070 CMXGSAMY426S, Black & Decker CS1216, Homelite UT10532, Earthwise CS30116 & CS33016 corded, Remington RM4216 Rebel 42cc 16" Chainsaw, .
● Blued cutters deliver better corrosion resistance and surface hardness.
● Multipurpose use, especially for clean or dirty wood, frozen or green wood.
● Work out of the box, easy to sharpen.
● For saw sizes up to 42 cc.

● Type: Standard Chain. 3/8" LP Pitch .050" Gauge 52 Drive Links 14 Inch.
● Compatible with Husqvarna 120i 436Li 536LiXP T536LiXP Ryobi RY3714 Oregon S52 Poulan 2150 2050 2055.
● Multipurpose use, especially for clean or dirty wood, frozen or green wood.
● Blued cutters deliver better corrosion resistance and surface hardness.
● Work out of the box, easy to sharpen.
● For saw sizes up to 42 cc.

● Compatible with Briggs & Stratton 799868 694202 693909 692648 499617 498170 497586 498254 497314 497347 497586 and more.
● Compatible with Briggs and Stratton 14111 carburetor, fits most 120XXX / 121XXX / 122XXX / 12EXXX / 12TXXX models with primer type system.
● Compitible with Briggs & Stratton 124T02 124T05 124T07 126M02 129700 129800 123H00 123J00 124H00 125H00 12G700 12G800 12J700 12J800 12J900 12L800 12U800 12V800 12C700 12C800 12D800 4 Cycle Small Engine; Toro 16401 20716 20712 20713 20714 Walk Behind Mower.
● Compatible with MPN 497410, 694882, 698444, 498966. Easy to install & start right up. Not a single adjustment is necessary. Idle perfectly.
● Designed and engineered with quality materials made for durability.

● Pitch: .325", gauge: .050", drive links: 78 , cutter type: full-chisel.
● Full chisel design cuts clean, fast, and smooth for high-production cutting.
● Exclusive German-origin steel provides greater durability and sharpness.
● Blued Cutters deliver superior protection against corrosion.
● Perfect for skilled loggers and forest workers for aggressive cutting.
● For saw sizes 38-62 cc.

● Carburetor replace # 753-06190, 753-08501,753-06423, WT-973, WT-973-1, H142A-25A-04. For sizes up to 25cc, 27cc engines & more.
● Parts Used on Cub Cadet CC212 CS202 SS270 BC210 BC280 Trimmer.
● Carburetor fits Murray M2510 M2500 RM2510 H2500 Trimmer.
● Carburetor fits Remington RM2510 RM2520 RM2560 RM2570 Weed Trimmer.
● Carburetor fits Bolens MTD BL110 BL160 String Trimmer.
● Package: Carburetor*1, Air filter*1, Fuel filter*1, Spark plug*1, Gasket*2, 2ft (2.4*4.8MM) Fuel line*1, Primer bulb*1, Pac Man Carb Adjustment tool*1.

Air filter Compatible with# Briggs & Stratton 496894S 496894 493909 4139 5053B 5053D 5053H 5053K; John Deere LG496894JD LG496894S, Craftsman 24151
Pre filter replaces # Briggs & Stratton 272403S 272403 4142, John Deere M143004 LG272403S LG272403
Size: Height 3 inch, Length 71/4 inch, width at narrow end 23/16 inch, width at wide end 27/8 inch
Package include:2 aftermarket air filters
Compatible with John Deere GX85 SX85 1338G 1338GS 1438GS 1438HS 1538H 1538HX 1546G 1546GS 1646HS 1542HS 1642HS 1646H Riding Mower / Lawn Tractor
Compatible with TORO lawn mower 71300 71301 74501 74570 77102 77104 77106 76 56177 5185, and more.

● Fits for Husqvarna 55 455 rancher 20 inch chainsaw, Poulan Pro pr5020 20 inch chainsaw, and more.
● Semi chisel cutters with aggressive cutting edge are more durable for rough sawing.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.
● 3/8" Pitch, .050" Gauge, 72 Drive Links, 20 Inch Bar Length.
● Chain Type: Ripping.
● For saw sizes up to 50-100 cc.

● Fits for Husqvarna 55 455 rancher 20 inch chainsaw, Poulan Pro pr5020 20 inch chainsaw, and more.
● Full chisel cutters offer clean and precise cuts with low kickback.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.
● 3/8" Pitch, .050" Gauge, 72 Drive Links, 20 Inch Bar Length.
● Chain Type: Full skip.
● For saw sizes up to 50-100 cc.

● FITS FOR CRAFTSMAN R1000 CARBURETOR, For 4P90HUA Carburetor Assembly 13A2775S000-Yard Machines Lawn Tractor(2015),LT 4200(13W277SS031) -Huskee 42" Lawn Tractor(2015),CLT 38 G(13A277KF897)-Columbia 38" Lawn Tractor(2015), CLT 42 G(13A277KS897) -Columbia 42" Lawn Tractor(2015),LT 4200(13W277SS231)-Huskee 42" Lawn Tractor(2015); 4P90JUD Carburetor Assembly 247.290000(13B226JD099) -Craftsman R1000 Rear-Engine Riding Mower(2015); 247.203690(13B226JD299) -Craftsman R1000 Rear-Engine Riding Mower(2015).
● For Predator 420cc Carburetor, Replace for MTD 951-05149, 95105149, 951 05149; Air Filter Replace for 937-05065 951-12260 951-12256.
● From hard-starting, stalling, leaking to smoking, we've got your fuel and ignition issues covered. Discover our solutions today!
● Package: Carburetor*1, Air filter*1, Fuel line*1, Fuel filter*1, Spark plug*1, Gasket*3.

● 632334A Carburetor fits for Tecumseh Engine HM80 HM70 HMSK80, HMSK90, 7HP 8HP 9HP Engine Snow Blower.
● 632334A Carburetor fits for Cub Cadet Engine 826 826T.
● 632334A Carburetor fits for Toro Snowthrower 38540 38080 38083 38084 38085 38543 38574.
● Compatible with 632334 632334a carburetor.
● Each Hipa carburetor comes fine-tuned from the factory.
● Package: carburetor*1, 1-feet fuel line*1, fuel filter*2, gasket*1, clamp*2, primer pump*1.

● Fits for Husqvarna 440 445 450 460 550 Racher 240 classic, Homelite UT10520 UT10518 UT10550 super, Jonsered CS2245 CS2250 CS 2250S 18 inch chainsaw, and more.
● Semi Chisel, .325" Pitch, .050" Gauge, 72 Drive Links, 18 Inch Chain. Chain Type: Ripping.
● Semi chisel cutters with aggressive cutting edge are more durable for rough sawing.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.

● Carburetor Replace: MTD 753-06258, 753-06258A, 753-06795, 753-08174, Ryobi 307160001 316299372 316773800.
● Carburetor for Ryobi RY252CS RY253SS RY251PH RY254BC Models 2 Cycle 25cc Engine Gas String Trimmer Brush Cutter Edger Cultivator.
● Stronger power & lower fuel consumption.
● Precisely aligned mounting hole makes perfect fit for your equipment.
● Pre-adjusted from the factory, easy to install.

● 18 Inch Chainsaw Chain: Full Chisel, For 18" guide bar, 72 drive links, Pitch: .325", Gauge: .050".For chainsaw sizes 38-62cc. Replaces OEM Part Numbers: Oregon H72.
● Fit For Craftsman, Cub Cadet, Dolmar, Echo, Homelite, Husqvarna, Jonsered, Makita, Maruyama, McCulloch, , Partner, Pioneer, Poulan, Powerhorse, Red Max, Remington, Ryobi, Shindaiwa, Solo, Tanaka, Troy-Bilt Chainsaws.
● High durability thanks to a precisely balanced combination of materials and manufacturing processes.
● Full chisel design contains the sharpness for a long time during rough sawing.
●Low vibration, Micro-Chisel cutters offer excellent performance and easy maintenance.
● Anti kickback design is safer and great for homeowners and novice.

● For 5HP Carburetor, Briggs and Stratton 498298 692784 495951 492611 490533 495426. This assembly includes a metal body carburetor and two (2) composite material gaskets.
● For 498298 Carburetor, Fits for Briggs and Stratton 1134-0 Generator, 135202 135200 130200 112200 112202 130232 Small Engine.
● For 5 HP Carburetor, Fits for Toro 62923 92924 Blower Vacuum.
● Carburetor Fits for Craftsman 521244711 521244712 521244913 521244930 521244950 Yard Vacuum, 917295554 917295852 Tiller.
● Pre-adjusted by manufacturer, bolt on and go!
● Package: carburetor*1, gasket*2.

● Parts Used On Cub Cadet 1P70FU 1P70FUA 1P70M0 2P70M0 CC500 CC550SP CC94M Lawn Mower, MTD 1P70FU 1P70FUA 1P70M0 2P70M0 Engine.
● For sizes up to 5hp, 5.5hp, 6hp, 173cc engines and more.
● Make your small engine tune-up easy with a factory pre-adjusted Hipa carburetor kit that's simple to install.
● Package: Carburetor*1, Air filter*1, pre filter*1, Spark plug*1, Gasket*3.

● Fuel Pump Replaces Kohler 24-393-16, 24-393-16-S, 24-393-16-04.
● Fits CH13T, CH18, CH18S, CH20, CH20S, CH20QS, Command ch 18 18s 20 20s engine fuel bump;
● Briggs and Stratton 808656 491922 808492 692313 fuel bump;
● Honda 16700-Z0J-003 gc160 5.0hp gc190 6hp gx620 20hp fuel bump;
● John Deere LG808656 / M138498 / M145667 L105 L107 L108 L111 L118 L120 L130 LT166 LT180 LT190 LTR166 LTR180 LX277 LX280 LX288 lawn mower.
● Hipa fuel pump ensures consistent and reliable fuel supply to solve your engine's starting issues, fuel tank noise and engine sputtering problems, and more.
● Package: fuel pump*1.

● Specs: thread diameter: 14mm; reach: 7.8mm; gap: 0.7mm.
● Hipa RDJ8JU Spark Plug Compatible with Champion RDJ7J; Craftsman MTD 753-06847 753-06193 794-00055A; NGK BMR6F.
● Trivalent metal plating provides superior anti-corrosion and anti-seizing properties.
● Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer.
● Nickel copper core increases your engine’s acceleration and fuel efficiency with stable ignitability.

● Pitch: .325", gauge: .050", 66 drive links, cutter type: full chisel.
● Exclusive German-origin steel provides greater durability and sharpness.
● Blued Cutters deliver superior protection against corrosion.
● Full chisel design cuts clean, fast, and smooth for high-production cutting.
● Perfect for skilled loggers and forest workers for aggressive cutting.
● For saw sizes 38-62 cc.

● Hipa 20 inch chainsaw chain fits for Husqvarna 455 rancher, Husqvarna 450 rancher, Stihl MS 290 310 029 390 024 066 chainsaw, and more.
● 20 inch full chisel chainsaw chain with 3/8 Pitch, .050" Gauge, 72 Drive Links, 20 Inch Bar Length, replace for oregon d72 chain.
● Full chisel cutters offer clean and precise cuts with low kickback.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.
● Sequence: Standard. For saw sizes up to 42 cc. Replace Oregon 72LPX072G, 72EXL072G, D72.
● Package one includes: 1 x Hipa chainsaw chain. Package two includes: 2 x Hipa chainsaw chains.(optional)

● Compatible with: MTD 951-14151 51-10658 Recoil Starter Assembly.
● Hipa recoil starter is made of low-stretch, heavy-duty nylon with a very high breaking strength while remaining soft and flexible to fire your engine with less cord pull.
● Easy to install, bolt on and go!
● Compatible with Troy Bilt Snow Blower Squall 2100 31AM2P5B 31AM2P5B711 31AM2P5B766 31AS2P5C 31AM62N2 31AS2P5C711 31AS2P5C766 31AS62N2766; Storm 2420 31AM63P2766 2620 2690 2690xp 5024.
● Compatible with Remington snow blower RM2200 31A-32AD783 RM2410 31AS63EE783 RM2460 31AM63FE783 RM2610 31AM63FF783.
● Package: recoil starter*1.

● Fuel Line Compatible with# 791-181767.
● Used on MTD Troy-Bilt 2079r TB2000 TB3000 string trimmer.
● Fuel Line Fits Cub Cadet CC2000 CC3000 string trimmer.
● Package: 3* fuel line assemblies.

● Fits for Husqvarna 455 455e 55 450 460 240 classic 20 inch chiansaw, Homelite UT 10520 10518 10550 super 20 inch chainsaw, and more.
● Semi chisel cutters with aggressive cutting edge are more durable for rough sawing.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.
● .325" Pitch, .050" Gauge, 78 Drive Links, 20 Inch Bar Length.
● Chain Type: Ripping.

● Exclusive German-origin steel provides greater durability.
● Blued Cutters deliver high-quality protection against corrosion.
● Must-have saw chain for experienced loggers and skilled forest workers for aggressive cutting.
● For saw sizes 50-100 cc.

● Compatible with Echo CS370 CS370F CS400 CS400F, Poulan Pro 2050 2055 P3818 P3314 P3416 P3816 P4018, Remington RM4214 RM4216 RM4218 Chainsaw, & more.
● Extraordinary versatility, fit for all chainsaws brands that run 3/8" low profile pitch, .050" narrow kerf gauge, 62 drive links .
● Can be used for softwood, frozen and dirty wood.
● Durable, low-kickback, low-vibration chain helps ease your fatigue from long hours of work.
● The semi-chisel cutters offer smoother cuts with a higher tolerance for dirt, dust, and debris.

● Fuel Pump Replaces JD LG808656 M138498 M145667
● Vacuum style fuel pump, fits 1/4-inch fuel line. Typical application: up to 25 horsepower.
● Used on John Deere L105 L107 L108 L118 L120 L130 LT166 LT180 LT190 LTR166 LTR180 LX277 LX280 LX288 Riding Lawn Mower.
● Used on John Deere L105 L107 L108 L118 L120 L130 LT166 LT180 LT190 LTR166 LTR180 LX277 LX280 LX288 Riding Lawn Mower;
● Package include: 1 fuel pump, 1 fuel filter.

● Fits for Husqvarma 455 460 465 257 254 262xp 357xp 55 rancher 18inch chainsaw, and more.
● Full chisel cutters offer clean and precise cuts with low kickback.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.
● 3/8" Pitch, .050" Gauge, 68 Drive Links, 18 Inch Bar Length.
● Chain Type: Standard.
● For saw sizes up to 50-100 cc.

● Universal fuel shut off valve: Can be used on I.D. 1/4-inch fuel line. COMPATIBLE WITH Briggs & Stratton 494768 493960 698183 698181 697947 5019H 5019K; John Deere AM107340 AM36141 698183MA, MU698183; TORO 54-3150 1-603770 5841-1 5905-1; Snapper 3-4212 / 2-4507 / 7034212
● Compatible with Kohler SV470 SV471 SV480 SV530 SV540 SV541 SV590 SV591 SV600 SV601 SV610 SV620 XT650 XT675, & more
● John Deere LA105 LA110 LA115 LA120 LA125 LA130 LA135 LA140 LA145 LA150 LA155 LA165 LA175 L105 L107 L108 L111 L118 L120 L130, & more
● Kawasaki FH381V FH430V FH451V FH500V FH531V FH541V FH580V, & more; Cub Cad LT1040 LT1042 LT1045 LTX1042 LTX1045 i1042 RZT42 LH4600H LT1042 LT1045 LTX1042 LTX1040 LTX1045 and RZT42 lawn mower tractor
● Package include: 5pcs fuel shut off valve

● Fits for Husqvarna 55 455 460 rancher 562XP 572XP 390XP 395XP 372XP 24 inch chainsaw, Poulan 3400 3700 3800 4000 4200 4400 4900 8500 chainsaw, Echo CS-620P chainsw and more.
● Semi chisel cutters with aggressive cutting edge are more durable for rough sawing.
● German origin steel and Blued Cutters provides great surface hardness and durability to make your saw stay sharp longer.
● 3/8" Pitch, .050" Gauge, 84 Drive Links, 24 Inch Bar Length.
● Chain Type: Ripping.
● For saw sizes up to 50-100 cc.

● Air filter replace Kohler 32 083 06-S 32-083-06-S 3208306-S 32 883 06-S1 32-883-06-S1 3288306-S1
● Tune Up kit Fit for Kohler SV710 SV715 SV720 SV725 SV730 SV735 SV740 SV810 SV820 SV830 SV840 20-25HP Courage PRO Engine Lawn Tractor
● 32-083-06-S Air Filter Size: 5-5/8" L x 4-1/4" W x 3" H. Pre Filter replace Kohler 32 083 08-S 32-083-08-S 3208308-S
● Oil Filter replace Kohler 52 050 02-S 25 050 27 25 050 34-S 52 050 02 25 050 33-S 52 050 02-S1
● KH-12-050-01-S Oil filter Size: Height: 2 3/4 " Micron: 32 8-11 PSI pressure relief valve anti-drain valve
● Package Included: 1X Air Filter,1X Fuel Filter,1X Oil Filter,1X Spark Plug
● Designed for increasing engine power and acceleration. Simple drop-in design, easy to install.
● The air filter keeps your engine safe against dirt.